RAM 2013 Cargo VAN Owner's Manual page 25

Remote Key Unlock On First Press
This feature lets you program the system to unlock either
the driver's side, or all doors, on the first press of the
UNLOCK button on the RKE transmitter:
NOTE:
• For vehicles equipped with an Electronic Vehicle In-
formation Center (EVIC), refer to "Electronic Vehicle
Information Center
(Customer-Programmable Features)" in "Understand-
ing Your Instrument Panel" for further information.
• For vehicles not equipped with the EVIC, the Remote
Unlock feature can be enabled or disabled by perform-
ing the following steps:
1. Perform this operation while standing outside the
vehicle.
(EVIC)/Personal Settings
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
2. Press and hold the LOCK button on a programmed
RKE transmitter for at least 4 seconds, but no longer
than 10 seconds. Then, press and hold the UNLOCK
button while still holding the LOCK button.
3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle by press-
ing the LOCK/UNLOCK buttons on the RKE trans-
mitter with the ignition switch in the OFF position and
the Key Fob removed.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Pressing the LOCK button on the RKE transmit-
ter while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle
Security Alarm activated will cause the alarm to sound.
Press the UNLOCK button to deactivate the Vehicle
Security Alarm.
2