Cleaning The Parksense® System; Parksense® System Usage Precautions - RAM 2013 Cargo VAN Owner's Manual

Hide thumbs Also See for 2013 Cargo VAN:
Table of Contents

Advertisement

246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
If "PARKSENSE UNAVAILABLE WIPE REAR SEN-
SORS" appears in the Electronic Vehicle Information
Center (EVIC) make sure the outer surface and the
underside of the rear fascia/bumper is clean and clear of
snow, ice, mud, dirt or other obstruction and then cycle
the ignition. If the message continues to appear, see an
authorized dealer.
If "PARKSENSE UNAVAILABLE SERVICE REQUIRED"
appears in the EVIC, see an authorized dealer.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.
ParkSense® System Usage Precautions
NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense® system oper-
ating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense®.
• When you turn ParkSense® OFF, the instrument clus-
ter will display "PARK ASSIST SYSTEM OFF." Fur-
thermore, once you turn ParkSense® off, it remains off
until you turn it on again, even if you cycle the ignition
key.
• When you move the shift lever to the REVERSE
position and ParkSense® is turned OFF, the EVIC will
display "PARK ASSIST SYSTEM OFF" message for as
long as the vehicle is in REVERSE.

Advertisement

Table of Contents
loading

Table of Contents