Download Print this page

Advertisement

Dell™ 1409X Projector
User's Guide
http://www.pureglare.com.au

Advertisement

   Also See for Dell 1409X

   Related Manuals for Dell 1409X

   Summary of Contents for Dell 1409X

  • Page 1

    Dell™ 1409X Projector User’s Guide http://www.pureglare.com.au...

  • Page 2

    Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 3: Table Of Contents

    Contents Your Dell Projector ....About Your Projector ....

  • Page 4

    ..... Contacting Dell™ ....

  • Page 5: Your Dell Projector

    Your Dell Projector Your projector comes with all the items shown below. Ensure that you have all the items, and contact Dell™ if anything is missing. Package Contents Power cable 1.8m VGA cable (VGA to VGA) CR2032 Battery Remote control CR2032 CD Owner’s manual &...

  • Page 6: About Your Projector

    Ensure that the projector is mounted in a well-ventilated area. Do not block the ventilation slots and openings on the projector. Ensure the projector operates between ambient temperatures (5ºC to 35ºC). NOTE: Product Information Guide For more information, see the that ships with your projector. Your Dell Projector http://www.pureglare.com.au...

  • Page 7: Connecting Your Projector

    VGA - A VGA - B S-Video In Video In Audio In Audio Out RS-232 Remote Dell 1409X DVI-D input connector VGA-A output (monitor loop-through) VGA-A input (D-sub) connector VGA-B input (D-sub) connector S-video connector Composite video connector Audio input connector...

  • Page 8: Connecting A Computer

    VGA to VGA cable USB to USB cable NOTE: The USB cable is not provided by Dell. NOTE: The USB cable must be connected if you want to use the Next Page and Previous Page features on the remote control.

  • Page 9: Connecting A Computer Using A Dvi-d Cable

    VGA - A S-Video In Video In Audio In Audio Out RS-232 VGA - B Remote Power cord DVI-D cable USB to USB cable NOTE: The USB cable and DVI-D cable are not provided by Dell. Connecting Your Projector http://www.pureglare.com.au...

  • Page 10: Connecting A Computer Using An Rs232 Cable

    Video In Audio In Audio Out RS-232 VGA - B Remote Power cord RS232 cable NOTE: The RS232 cable is not provided by Dell. Consult a professional installer for the cable and RS232 remote control software. Connecting Your Projector http://www.pureglare.com.au...

  • Page 11: Connecting A Dvd Player

    VGA - B S-Video In Video In Audio In Audio Out RS-232 Remote Power cord S-video cable NOTE: The S-video cable is not provided by Dell. You can buy the S-Video Extension (50ft/100ft) cable from the Dell website. Connecting Your Projector http://www.pureglare.com.au...

  • Page 12: Connecting A Dvd Player Using A Composite Cable

    S-Video In Video In Audio In Audio Out RS-232 Remote Power cord Composite video cable NOTE: The Composite cable is not provided by Dell. You can buy the Composite Video Extension (50ft/100ft) cable from the Dell website. Connecting Your Projector http://www.pureglare.com.au...

  • Page 13: Connecting A Dvd Player Using A Component Cable

    RS-232 VGA - B Remote Power cord VGA to YPbPr cable NOTE: The VGA to YPbPr cable is not provided by Dell. You can buy the VGA to YPbPr Extension (50ft/100ft) cable from the Dell website. Connecting Your Projector http://www.pureglare.com.au...

  • Page 14: Connecting A Dvd Player Using A Hdmi Cable

    VGA - A VGA - A S-Video In Video In Audio In Audio Out RS-232 VGA - B Remote Power cord HDMI cable DVI-D adapter NOTE: The HDMI cable and DVI-D adapter are not provided by Dell. Connecting Your Projector http://www.pureglare.com.au...

  • Page 15: Using Your Projector

    Turn on your source (computer, DVD player, etc.). The projector automatically detects your source. The Dell Logo will continue for 30 seconds while power on. If the "Searching for signal..." message appears on the screen, ensure that the appropriate cables are securely connected.

  • Page 16: Adjusting The Projected Image

    Lower the projector, and then release the button to lock the elevator foot into position. DVI-D In VGA - A VGA - A VGA - B S-Video In Video In Audio In Audio Out RS-232 Remote Dell 1409X Elevator button Elevator foot Tilt adjustment wheel Using Your Projector http://www.pureglare.com.au...

  • Page 17: Adjusting The Projector Zoom And Focus

    Adjusting the Projector Zoom and Focus CAUTION: To avoid damaging the projector, ensure that the zoom lens and elevator foot are fully retracted before moving the projector or placing the projector in its carrying case. Rotate the zoom tab to zoom in and out. Rotate the focus ring until the image is clear.

  • Page 18: Adjusting Projection Image Size

    Adjusting Projection Image Size 302.8"(769.2cm) 227.1"(576.9cm) 176.7"(448.7cm) 126.2"(320.5cm) 75.7"(192.3cm) 25.2 "(64.1cm) 22.89" (58.3cm) 3.3'(1.0m) Using Your Projector http://www.pureglare.com.au...

  • Page 19: Using The Control Panel

    If the LAMP light is solid amber, replace the lamp. If the LAMP light is blinking amber, the lamp driver or color wheel have failed and the projector automatically shuts down. If the problem persists, contact Dell™. Using Your Projector http://www.pureglare.com.au...

  • Page 20

    The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell™. • A blinking amber TEMP light indicates that a projector fan or color wheel have failed and the projector automatically shuts down.

  • Page 21: Using The Remote Control

    Using the Remote Control 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 10 10 20 20 LED light LED indicator. Source Press to switch between Digital RGB, Analog RGB, Composite, S-video, Component (YPbPr via VGA).

  • Page 22: Using The On-screen Display

    15 and "Turning Your Projector Off" on page 15. 12 Video mode The Dell 1409X Micro-projector has preset configurations that are optimized for displaying data (PC Graphics) or video (movies, games, etc.). Press the Video Mode button to toggle...

  • Page 23: Main Menu

    adjust the settings. To go back to Main Menu, go to Back tab and press the Enter button on the control panel or the remote control. To exit the OSD, go to EXIT tab and press the Enter button or press the Menu button directly on the control panel or the remote control.

  • Page 24: Auto-adjust

    AUTO-ADJUST Auto Adjust automatically adjusts the projector's FREQUENCY and TRACKING in PC mode. While Auto Adjustment is in progress, the following message appears on the screen, "Auto Adjustment in Progress...". SET UP It includes V. Keystone, Auto Keystone, Projector Mode, Aspect Ratio and Projector Info settings.

  • Page 25: Picture (in Pc Mode)

    – Component cable (720p/1080i/1080p) —Displays the projector model name, the present input source and ROJECTOR projector series number (PPID#). PICTURE (in PC Mode) Using the Picture menu, you can adjust the display settings of your projectors. The Picture menu, provides the following options: —Use adjust the brightness of the image.

  • Page 26: Picture (in Video Mode)

    PICTURE (in Video Mode) Using the Picture menu, you can adjust the display settings of your projectors. The Picture menu, provides the following options: —Use adjust the brightness of the image. RIGHTNESS —Use to adjust the display contrast. ONTRAST —Allows you to adjust the color temperature. The screen appears OLOR cooler at higher color temperatures and warmer at lower color temperatures.

  • Page 27: Display (in Pc Mode)

    DISPLAY (in PC Mode) Using the Display menu, you can adjust the display settings of your projectors. The Picture menu, provides the following options: —Allows you to optimize the projectors display mode: IDEO PC, Movie, sRGB (provides more accurate color representation), Game, and Custom (set your preferred settings).

  • Page 28: Display (in Video Mode)

    —Allows you to change the display data clock frequency to match the REQUENCY frequency of your computer graphics card. If you see a vertical flickering wave, use Frequency control to minimize the bars. This is a coarse adjustment. —Synchronize the phase of the display signal with the graphic card. If you RACKING experience an unstable or flickering image, use Tracking to correct it.

  • Page 29: Lamp

    LAMP Using the Lamp menu, you can adjust the display settings of your projectors. The Picture menu, provides the following options: —Displays the operating hours since the last lamp timer reset. —Select Yes to set the Power Saving delay period. The delay period is OWER AVING the time you want the projector to wait without an input signal.

  • Page 30: Language

    LANGUAGE The Language menu allows you to set the language for the OSD. Using Your Projector http://www.pureglare.com.au...

  • Page 31: Others

    Input in a source at native resolution then press Enter and select "Yes". The projector will capture the screen image as a "My Customized logo". This screen replaces all the original screens with the Dell logo. User can recover the default screen by selecting Dell Logo on the pop-up screen.

  • Page 32

    —When Password Protect is enabled, a Password Protect screen ASSWORD requesting you to enter a password will be displayed when the power plug is inserted into the electrical outlet and the power for the projector is first turned on. By default, this function is disabled. You can enable this feature using the Password menu.

  • Page 33

    If you have entered incorrect password, you will be given another 2 chances. After the three invalid attempts, the projector will automatically turn off. NOTE: If you forget your password, contact DELL™ or qualified service personnel. To cancel the password function, select Off and enter the password to disable the function.

  • Page 34

    Using Your Projector http://www.pureglare.com.au...

  • Page 35: Troubleshooting Your Projector

    Troubleshooting Your Projector If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact Dell™. See Contacting Dell™ on page 44 Problem Possible Solution No image appears on the • Ensure that the lens cap is removed and the screen projector is turned on.

  • Page 36

    Press the Auto Adjust button on the remote incorrectly displayed image control or the control panel. If you are using a Dell™ portable computer, set the resolution of the computer to XGA (1024 x 768): Right-click the unused portion of your Windows desktop, click Properties and then select Settings tab.

  • Page 37

    The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell™. TEMP light is blinking amber A projector fan has failed and the projector will automatically shut down. If the problem persists, contact Dell™.

  • Page 38

    (continued) (continued) Problem Possible Solution The remote control is not The battery may be low. Check if the LED operating smoothly or works indicator from the remote is too dim. If so, only within a limited range replace with a new CR2032 battery. Troubleshooting Your Projector http://www.pureglare.com.au...

  • Page 39: Changing The Lamp

    Replacement suggested! www.dell.com/lamps" appears on the screen. If this problem persists after replacing the lamp, contact Dell™. For more information, see Contacting Dell™on page 45. CAUTION: The lamp becomes very hot when in use. Do not attempt to replace the lamp until the projector has been allowed to cool down for at least 30 minutes.

  • Page 40

    LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

  • Page 41: Specifications

    Specifications Light Valve 0.55" XGA DMD Type X, DarkChip2™ Brightness 2500 ANSI Lumens (Max.) Contrast Ratio 1900:1 Typical (Full On/Full Off) Uniformity 85% Typical (Japan Standard - JBMA) Number of Pixels 1024x 768 (XGA) Displayable Color 16.7M colors Color Wheel Speed Projection Lens F-Stop: F/ 2.41~2.55 Focal length, f=21.8~24 mm...

  • Page 42

    The lamp life specified for Dell's projectors refers to the typical time under non-stressful operating conditions for more than 50% of a sampling population to reduce to approximately 50% of the lamp's rated brightness level.

  • Page 43

    Example: Power ON Command (Send low byte firstly) --> 0xBE, 0xEF, 0x10, 0x05, 0x00, 0xC6, 0xFF, 0x11, 0x11, 0x01, 0x00, 0x01 • Control Commands List To view the latest RS232 code, go to the Dell Support site at: support.dell.com. Specifications http://www.pureglare.com.au...

  • Page 44

    Compatibility Modes (Analog/Digital) Resolution V. Frequency (Hz) H. Frequency (KHz) 640X480 59.9 31.5 640X480 37.5 640X480 43.3 720X400 70.1 31.5 720X400 37.9 800X600 60.3 37.9 800X600 46.9 800X600 85.1 53.7 848X480 1024X768 48.4 1024X768 1024X768 68.7 1280X720 59.9 44.8 1280X768 59.9 47.8 1280X800...

  • Page 45: Contacting Dell

    Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Visit support.dell.com.

  • Page 46

    Contacting Dell™ http://www.pureglare.com.au...

  • Page 47: Appendix: Glossary

    Appendix: Glossary ANSI L —A standard for measuring the brightness. It is calculated by UMENS dividing a square meter image into nine equal rectangles, measuring the lux (or brightness) reading at the center of each rectangle, and averaging these nine points.

  • Page 48

    dB— decibel—A unit used to express relative difference in power or intensity, usually between two acoustic or electric signals, equal to ten times the common logarithm of the ratio of the two levels. Diagonal Screen— A method of measuring the size of a screen or a projected image.

  • Page 49

    S-Video—A video transmission standard that uses a 4-pin mini-DIN connector to send video information on two signal wires called luminance (brightness, Y) and chrominance (color, C). S-Video is also referred to as Y/C. SECAM— A French and international broadcast standard for video and broadcasting, closely related to PAL but with a different method of sending color information.

  • Page 50

    Glossary http://www.pureglare.com.au...

  • Page 51

    RS232 cable 10 loop-through) 7 Connecting with a Component VGA-B input (D-sub) connector Cable 13 Connecting with a Composite Cable 12 Contact Dell 5 Connecting with an HDMI Control Panel 19 Cable 14 Connecting with an S-video Cable 11 DVI-D adapter 14...

  • Page 52

    Picture (in Video Mode) 26 Uniformity 41 Set Up 24 Video Compatibility 41 Weight 42 support contacting Dell 45 phone numbers 45 Powering On/Off the Projector Powering Off the Projector 15 Powering On the Projector 15 telephone numbers 45 Troubleshooting 35...

Comments to this Manuals

Symbols: 0
Latest comments: