Chapter 34 Vdsl Commands; Vdsl Commands Overview; Command Summary; Vdsl Commands - ZyXEL Communications Prestige 861H-G1 User Manual

This chapter shows you how to configure VDSL using line interface commands.

34.1 VDSL Commands Overview

Line interface commands contain advanced configuration features that may be used for
debugging and troubleshooting. Exercise caution when using commands as incorrect usage may
damage your Prestige.
See Table 34-1 VDSL Command Summary for an overview of VDSL commands.

34.2 Command Summary

The following tables are summaries of the commands available in the Prestige together with a
brief description of each command. See the related section in the User's Guide for more
background information.

34.2.1 vdsl Commands

Valid commands are:
MODULE COMMAND
vdsl port
profile
VDSL Commands

Table 34-1 VDSL Command Summary

SUB-COMMAND ARGUMENTS
clrcntr
counter
snr
speed
actv
default
Prestige 861H User's Guide
Chapter 34
VDSL Commands
DESCRIPTION
Clears the current performance
counter.
Get the current performance counter
from the VDSL modem.
If the VDSL line is not up, no output
is displayed. Otherwise it displays
the SNR ratio of the current
connection.
If the VDSL line is up, then it will
display the line rate and payload
rate. Otherwise a row of zeros is
displayed. The transmit power is also
displayed.
This command sends the current
selected profile to BME (VDSL
modem). It downloads modem code
into BME and also sends system and
port provisioning data to BME.
BME then starts a linkup attempt with
the VDSL line.
The command will have no effect if
the current used profile has the same
settings as the current running profile
settings.
Reset profile setting to factory
defaults.
34-1