Table 18-2 Menu 4 Internet Access Setup - ZyXEL Communications Prestige 861H-G1 User Manual

The following table contains instructions on how to configure your Prestige for Internet access.
FIELD
ISP's Name Enter the name of your Internet Service Provider. This information is
for identification purposes only.
Encapsulation Press [SPACE BAR] to select the method of encapsulation used by
your ISP. Choices are PPPoE, PPPoA, RFC 1483 or ENET ENCAP.
Multiplexing The Prestige supports LLC multiplexing method.
VPI # Enter the Virtual Path Identifier (VPI) assigned to you.
VCI # Enter the Virtual Channel Identifier (VCI) assigned to you.
Type a Service Name for PPPoE encapsulation only. Enter the login
Service Name
name that your ISP gives you.
Configure the My Login and My Password fields for PPPoA and
My Login
PPPoE encapsulation only. Enter the login name that your ISP gives
you. If you are using PPPoE encapsulation, then this field must be of
the form user@domain where domain identifies your PPPoE service
name.
My Password Enter the password associated with the login name above.
NAT Press [SPACE BAR] to select None, SUA Only or Full Feature.
Please see the NAT Chapter for more details on the SUA (Single
User Account) feature.
Address Type the numbers of mapping sets (1-8) to use with NAT. See the
Mapping Set NAT chapter for details.
IP Address Press [SPACE BAR] to select Static or Dynamic address
Assignment assignment.
IP Address Enter the IP address supplied by your ISP if applicable.
ENET ENCAP Enter the gateway IP address supplied by your ISP when you are
Gateway using ENET ENCAP encapsulation.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
If all your settings are correct your Prestige should connect automatically to the Internet. If the
connection fails, note the error message that you receive on the screen and take the appropriate
troubleshooting steps.
Internet Access

Table 18-2 Menu 4 Internet Access Setup

DESCRIPTION
Prestige 861H User's Guide
EXAMPLE
MyIsp
ENET ENCAP
LLC-based
8
32
user@domain
********
SUA Only
N/A
Dynamic
N/A
N/A
18-7