Chapter 7 System; Hot Standby (For U100 Only) - Zycoo CooVox-U20 User Manual

Chapter 7 System

7.1 Hot Standby (For U100 only)

The function will working between the two Coovox-U100 devices. When the primary server faults,
the slave server will replace it.
Item
Enable
Hot Standby Mode
Local Hostname
Remote Hostname
Local IP
Local Heart Line Port
Local Port
Remote IP
Remote Heart Line Port
Remote Port
Virtual IP
SYNC Network Rate
Status Fresh Time
Remote Link Timeout
Copyright ©ZYCOO All rights reserved. V1.0
Explanation
Enable 'Hot Standby' function.
Set the local server hot standby mode.
Set the local server host name.
Set the remote server host name
Set the local server IP address.
Set the local server heart line port
Set the local server port (default: 7788)
Set the remote server IP address
Set the remote server heart line port
Set the remote server port(default: 7788)
Set the virtual IP address. The primary server and slave
server must use same virtual IP address
Select the server network rate.
Set the status fresh time(sec)
Set the remote link timeout(sec)
71