Email To Fax - Zycoo CooVox-U20 User Manual

Reference
Item
SMTP Server
Port
SSL/TSL
Enable SMTP Authentication
Username
Password
Click 【Send Test】 after configuration, the following diagram will be displayed to ask you to input
the Email for receiving.
Specify the email address and click【Send】-to send the test email. Verify that email was
successfully sent or not. If no email was received, please modify the SMTP settings and
retry.

3.4 Email to Fax

Users can send fax by Email. Please configure as below.
Click【Advanced】->【Email to Fax】
You must set SMTP Server address or domain connected to the CooVox IP
PBX, which is used for sending the voice message to Email.
Port number for SMTP server. Default is 25, and it will be changed to 465 when
you enable SSL/TLS.
Enable SSL/TLS.
If your SMTP server needs authentication, please enable this option, and
configure the following.
Input username of your Email.
Input password of your Email.
45
Copyright ©ZYCOO All rights reserved. V1.0
Explanation