Cleaning And Maintenance - SATO GZ4e Series Operator's Manual

CLEANING AND MAINTENANCE

This section provides information on user maintenance for the GZ4e series printer.
The following information is covered here:
• 4.1 Cleaning the Print Head, Platen and Rollers
• 4.2 How to Clean the Printer (Cleaning Kit)
• 4.3 How to Clean the Printer (Cleaning Sheet)
• 4.4 Replacement Procedures
• 4.5 Adjusting Print Quality
Caution
When cleaning the print head, bear in mind that the print head and its surroundings may be hot.
•
Wait until the printer cools down before proceeding to clean the printer.
• Be sure to turn off the power before cleaning.
• The suggested cleaning schedules here are just guidelines. If necessary, clean as appropriate,
depending on the degree of contamination.
• Use a cleaning pen, cotton swab or cotton cloth, from an approved cleaning kit, to clean the
printer units.
• Use only soft, lint-free materials for cleaning. Avoid using hard objects for the cleaning process,
as they will damage the components.
GZ4e Series Operator Manual
Section 4: Cleaning and Maintenance
Page 4-1