Operator Panel - SATO GZ4e Series Operator's Manual

Section 3: Configuration and Operation

3.1 OPERATOR PANEL

The operator panel locate on the front consist of one two-color (red and green) LED indicator, two momentary
contact buttons, three adjustment potentiometers and one LCD display.
Note: There are two DIP switches, one LED and one potentiometer located behind the operator panel cover.
These are not accessible and are only for SATO authorized service personnel.
LED Indicator
Status
Buttons
LINE
FEED
Potentiometers
Print
Offset
Pitch
Page 3-2
• Illuminates green when online and off when offline.
• Blinks green when receiving data or the buffer is near full.
• Illuminates red when detecting a printer error.
Moves the printer from an online to offline state and vice versa, scrolls menu
options, and performs other special functions as identified in flow charts
throughout this manual where applicable.
This button acts as a pause during a print job by taking the printer offline.
Advances the label media when pressed, selects menu options, and per-
forms other special functions as identified in flow charts throughout this man-
ual where applicable.
Potentiometer to adjust print darkness (fine tuning).
Potentiometer to adjust amount of back/forward feed for dispenser/ cutter/
tear-off bar position (± 3.75 mm, ± 0.15").
Potentiometer to adjust home position of the label (± 3.75 mm, ± 0.15").
Affects stop position of label feed, print position and dispense.
Media roll holder
Media holder guide
Print head lock lever
Functions
Functions
Functions
GZ4e Series Operator Manual