Ghz Wds - Amped Wireless APR175P ProSeries AC1750 User Manual

APR175P USER'S GUIDE
5.0GHz Wi-F Settings: WDS
WDS Settings are only available in the WDS-Access Point (WDS-AP)
operational mode. If you are not using the WDS-AP operational
mode please disregard this section. WDS mode allows the Access
Point to interconnect with other WDS enabled Access Points and
Bridges (such as the Amped Wireless REB175P ProSeries Wi-Fi Range
Extender/Bridge). WDS allows you to extend your network by adding
additional wirelessly connected Access Points, also referred to as a
repeater, in addition to Bridges.
For WDS connections to work properly, the MAC address associations
must also be configured on each individual WDS enabled Access Point, not just the one you are currently
configuring. For example, if you are connecting three WDS-APs, AP 1 must have AP 2 and AP 3's MAC address
conifgured, while AP 2 has AP 1's and AP 3's MAC, and AP 3 has AP 1's and AP 2's MAC configured. Every WDS
connected device must also be using the same wireless channel as all other WDS connected devices.
Encryption can be used to secure your WDS connections. If you choose to use encryption (recommended), it is
important that you set the same security key setting on all connected WDS enabled Access Points and Bridges.
73