Operational Mode - Amped Wireless APR175P ProSeries AC1750 User Manual

APR175P USER'S GUIDE
Dashboard: Operational Mode
If the Access Point is already in Access Point Controller
mode, then the Current Operational Mode should show
Access Point Controller. There is nothing else needed to
configure on this page if that is the intended operational
mode. If you wish to change the operational mode, you
may do so here. Selecting an operational mode from the
dropdown menu will also provide you with a diagram and
overview of the operational mode selected. Once you have chosen a mode, click Apply to apply the changes.
The Auto-DHCP Server feature automatically manages the IP addresses within your network. When connected
to a network that has a DHCP server enabled, the Access Point/Router will automatically obtain an IP from the
network's DHCP server and disable the DHCP server on the Access Point / Router to avoid any IP assignment
conflicts. For users that are not familiar with how this works, it is recommended to leave Auto-DHCP server
enabled on this page.
116