Amped Wireless APR175P ProSeries AC1750 User Manual page 162

APR175P
Troubleshooting: Wireless Issues
I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the Access
Point.
a. Step back at least 10 feet from the Access Point and check your signal again. The Access Point emits
high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close
range. The speed and signal are at 100%, however your readout may not be displaying the data
correctly.
b. Check that your antennas are securely fastened to the antenna connectors.
c. The wireless channel that your network is running on may be congested. Change the wireless channel
on your Access Point.
The range from the Access Point seems low.
a. Check to see that your wireless output settings are at 100%. Go to the web menu, Wireless Settings and
check the Advanced Settings. Make sure the output power is at 100%.
b. Check that your antennas are securely fastened to the antenna connectors.
c. Your Access Point may be installed in a poor location. Avoid setting up your Access Point in areas with
high interference, such as near fridges, microwaves, metallic objects and low surfaces. Install the Access
Point in a higher location if possible.
USER'S GUIDE
161