Amped Wireless APR175P ProSeries AC1750 User Manual page 160

APR175P
My Access Point was working fine previously, but now I can no longer access the Internet through the Access
Point.
a. The settings on your router's network may have changed or you may have lost internet connection on
your home router. Any changes to the DHCP settings of your home router may affect the Internet
connection of the Access Point. Check the settings on your router and try again.
b. Reboot the Access Point by unplugging the power adapter and plugging it back in. Allow up to 2 minutes
for the Access Point to reconfigure itself to your network. Check to see if your connection has been
reestablished by viewing a website.
I can no longer access the web menu or the Access Point no longer responds.
a. Double check that you are connected to the Access Point and not to your home router. Use an Ethernet
cable and attach it between your computer and the Access Point. Disconnect your computer from all
wireless networks and try to access the web menu again.
b. If you are advanced in networking troubleshooting, log onto your home router's web interface. Look
for the DHCP client list and try to find the IP address of your Access Point assigned by your home router.
Once you have it, connect to the Access Point using an Ethernet cable. Open your web browser and
enter the IP address into the address bar.
USER'S GUIDE
159