Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
Match the positions of 1st moving barrel and zoom barrel as illustrated.
Insert the 1st moving barrel into the zoom barrel to the end with setting projection and linear groove.
After inserting, check that the positions of the window of zoom barrel and the hole of 1st moving barrel are as shown in the Fig.1.
1st Moving Barrel
Turn the 1st moving barrel to the arrow direction about 10 degrees, and engage the cam part of the 1st moving barrel and projection
of the zoom barrel as shown in the figure.
Check that the positions of the window of zoom barrel and the hole of 1st moving barrel are as shown in the Fig.2.
Projections of the
Turn the 1st moving barrel
about 10 degrees
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
Cam portion of the
1st moving barrel