Download  Print this page

Focus Brush Position Check/Adjustment And Pattern Check - Sony SAL1870 Service Manual

Lens for dslr camera
Hide thumbs

Advertisement

4-7.

FOCUS BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK

Note:
If dialog box of error code appears during the checking or adjustment, check the reason of error referring to page 4-23.
4-7-1. Focus Brush Position Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note: Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1) Connect the checking lens to the camera.
2) Start the lens adjustment program "LensAdjustment.exe" referring to "4-1-2. Lens Adjustment Program".
Fig. 4-7-1
2. Checking Method
[Connect]
1) Click the
button on the lens adjustment program.
[End]
Note:
Click the
Fig. 4-7-2
[Focus]
2) Click the
button on the lens adjustment program.
3) Set the zoom position to Tele end and the focus position to infinity end, then check that the OK (Green) indicator of "Position" lights
as shown in Fig. 4-7-3.
Fig. 4-7-3
If the NG (Red) indicator of "Position" lights, perform the "4-7-2. Focus Brush Position Adjustment and Pattern Check".
Fig. 4-7-4
[Exit]
4) Click the
button.
[End]
5) Click the
button to terminate the lens adjustment program.
6) Turn the POWER switch of the camera to OFF.
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
button to disconnect the USB connection, then lens adjustment program will terminate.
4-20

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Sony SAL1870