4-7-2. Focus Brush Position Adjustment and Pattern Check
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Adhesive bond (B-10)
• Lens Adjustment Program
Lens Adjustment Program is downloadable from the ESI homepage.
• Zoom Barrel Holder Jig
For details of the jig making method, refer to "4-1-1. List of Service Tools and Equipments".
Attach the zoom barrel holder jig to the checking lens and assemble the lens.
2. Focus Brush Position Adjustment
Set the focus position to infinity end.
Loosen the two screws fixing the focus brush.
Perform the "4-7-1. Focus Brush Position Check", and adjust the focus brush position until the OK (Green) indicator of "Position"
Tighten the two screws loosened in step 2).
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)