Grease (G-116): J-6082-628-A
Apply the grease (G-116) to the instruction part of the zoom cam barrel.
Apply the grease (G-116) (Cam part: 3 areas)
Match the positions of joint tube block and zoom cam barrel, and insert the zoom cam barrel into the joint tube block to the end as
shown in the figure.
Turn the zoom cam barrel about 90 degrees from the end to the arrowed direction, and engage bayonet to the joint tube block.
Joint Tube Block
About 90 degrees
from the end to the
Zoom Cam Barrel
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
Apply the grease (G-116) (All circumference)