Download  Print this page

Sony SAL1870 Service Manual page 20

Lens for dslr camera
Hide thumbs

Advertisement

6.
Match the positions of the linear slider positioned at the window of the zoom control tube block and the guide key positioned at two
holes of joint tube block.
7.
Insert the joint tube block into the zoom control tube block to the end.
Note:
If it cannot be inserted, return to step 1, and check that the focus connection part is matched to the claw of the gear barrel.
Liner slider
Window
(1st Moving Barrel)
Zoom Control Tube Block
8.
After inserting, check that the position is as shown in the figure.
9.
Turn the zoom barrel until the screw hole of the zoom cam barrel is seen from the hole of the zoom barrel as shown in the figure.
10. Attach the zoom coupling roller, and fix it with the screw.
Zoom Barrel
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
Two holes
Focus Connection Part
Claw of the gear barrel
Screw hole of the zoom cam barrel
Hole for the zoom coupling roller
Window
Screw hole of the zoom cam barrel
Zoom Coupling Roller
Window
Guide key
(The internal circumference
side of the connection barrel.)
Joint Tube Block
HELP

Hide quick links:

Advertisement

loading

  Related Manuals for Sony SAL1870