3. Pattern Check
Note: When the NG (Red) indicator of "Position" lights during checking, does not care about it (It is normal performance).
Turn the zoom ring slowly from the Tele end "Zoom Pattern : 1" to Wide end "Zoom Pattern : 28" and check that the value of "Zoom
Pattern" change from 1 to 28 continuously.
Turn the zoom ring slowly from Wide end (Zoom Pattern : 28) to the Tele end (Zoom Pattern : 1) and check that the value of "Zoom
Pattern" change from 28 to 1 continuously.
Turn the POWER switch of the camera to OFF.
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
button to terminate the lens adjustment program.