Download  Print this page

Sony SAL1870 Service Manual page 19

Lens for dslr camera
Hide thumbs

Advertisement

HELP10
1.
Turn the gear barrel until the two screw holes of the gear barrel are seen from the square window as shown in the figure.
2.
Attach the focus brush to the gear barrel, and fix them with the two screws tentatively.
3.
Pull the front lens barrel to the telephoto end, and check that the two screw heads are seen from the window.
4.
Put the zoom control tube block on the desk to let the front lens barrel sink into the deepest point with its weight, and keep the
position.
Window
5.
Check that the position of the zoom control tube block is as shown in the figure when seeing the inside in the state of step 4.
Focus Stopper
SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)
Focus Brush
Square window
Screw holes of the gear barrel
Front Lens Barrel
Focus stopper is attached
the front lens barrel.
Front Lens Barrel
The liner slider of the 1st moving
barrel is about at this point.
(Focal-length around 35 mm)
HELP

Hide quick links:

Advertisement

loading

  Related Manuals for Sony SAL1870