Gateway E-4500D User Manual page 94

■ Router Name
in these fields and, if so, what entries are required. Normally, leaving the fields
blank will work.
■ LAN IP Address
■ WAN IP Address
log on, click
address, click
4
When you are finished entering information on the Setup page, click
5
Click the tab on the top of the screen.
DHCP
6
Click the
Enable
7
Press the reset button on your cable or DSL modem, then restart the computer. Your
network should be running. Go to
and - Check with your ISP to see if entries are required
Domain Name
- We recommend that you accept the defaults.
- If your ISP assigns you a different IP address each time you
Obtain an IP Address Automatically
Specify an IP Address
checkbox, then click
"Testing your network" on page
www.gateway.com
Creating an Ethernet network
. If your ISP requires a fixed IP
, then type the values provided by your ISP.
.
Apply
.
Apply
90.
89