Connection And Operation: Power Injector - King Quest VQ4100-OE Owner's Manual

2

CONNECTION AND OPERATION: POWER INJECTOR

1
Connect your receiver to your TV.
2
Plug in receiver and TV and turn on (you may need to plug in power injector as well).
3
Choose your TV's input that matches the connection from your receiver.
4
IMPORTANT! Configure your receiver as shown below.
5
Connect coax from power injector to SATELLITE IN on receiver.
When all connections are made, the antenna unit will scan for the DIRECTV 101 satellite.
When the satellite is found, your programming will appear. Enjoy!
The antenna unit may lock on the satellite in as little as 2 minutes,
To start a new scan, press the RESET button on the power injector.
The KING Quest will not lock on the 119
satellite, so you will not receive your local
channels if they are broadcast from the
119. If you wish to receive programming
from the 119 as well as the 101, you
can replace the power injector with the
KING UC1000 Controller (sold separately
- see your dealer or our website www.
kingconnect.com for details.)
PLEASE BE PATIENT!
but may occasionally take up to 10-15 minutes.
For second receiver use, see page 13.
Page 3