DISH HD and SD
Bell TV SD
If the indicated results are not obtained, go back to Step 4 and run test again. Contact KING if
the check switch fails to load after 4 attempts.
9. When the installation summary shows the successful check switch test results, save the settings,
exit to the main menu screen and wait for programming to download.
10. DISH HD and SD and DISH HD and SD Alternate only: Verify that your saved settings show
your desired satellite trio: 61.5, 110, 119 or 110, 119, 129. To switch trios, see section 4.
Configuration is complete. Go to page 10, OPERATION.
NO "X"s
MUST SHOW
"SW64"
"NO SWITCH
DETECTED"
or
"INSTALLED
DEVICE
UNKNOWN"
or
similar
MUST SHOW
"SW21"
NO "X"s
DISH HD and SD Alternate
Bell TV HD and SD
Page 9