Table of Contents
Advertisement
SYMPTOM
Antenna unit does not scan
for satellites.
Antenna unit scans but no
picture on TV.
Antenna unit scans but does
not find satellite.
Picture on TV goes in and out. Temporary obstruction of signal. Heavy rain or snow may cause loss of signal.
15
TROUBLESHOOTING
POSSIBLE CAUSE
No power to antenna unit.
Antenna unit needs to be reset.
Improper connections made.
Line of sight obstruction.
COURSE OF ACTION
Make sure antenna unit is connected to power
injector or UC1000 Controller.
Make sure power supply is plugged in and connected
to power injector or UC1000 Controller.
Press RESET on power injector or SCAN on UC1000
Controller.
Make sure antenna unit is connected to power
injector or UC1000 Controller, and power injector or
UC1000 Controller is plugged in.
Make sure powered receiver is connected to TV and
either the power injector or UC1000 Controller.
Move antenna unit to have a clear view of the
southern sky. Press RESET on power injector or
SCAN on UC1000 Controller to start a new scan.
Reception will improve as weather clears.
Make sure nothing is temporarily blocking view to the
southern sky (like tree branches blowing in the wind).
Page 31
Hide quick links:
Advertisement
Table of Contents
