Wire Drive Systems; Changing Drive Rolls And Wire Guides - Lincoln Electric POWER FEED 10M SINGLE/DUAL SVM172-A Service Manual

A-7

WIRE DRIVE SYSTEMS

Drive Roll Kits are designed to feed specific types and
wire sizes. The Power Feed 10M Single Wire Feeder
does not include these Drive Roll Kits with this Wire
Drive, but are available for ordering from the following
tables:
Drive Roll Kits, Steel Wires
Includes: 4 Smooth V groove drive rolls and an inner
wire guide.
KP1505-030S
KP1505-035S
KP1505-045S
KP1505-052S
KP1505-1/16S
Drive Roll Kits, Cored Wires
Includes: 4 Knurled drive rolls and an inner wire guide.
KP1505-035C
KP1505-045C
KP1505-052C
KP1505-1/16C
Drive Roll Kits, Steel or Cored Wires
Includes: 4 Knurled drive rolls and an inner wire guide.
KP1505-068
KP1505-5/64
KP1505-3/32
KP1505-7/64
KP1505-.120
Drive Roll Kits, Hardfacing Wires
Includes: 2 Knurled drive rolls, 2 Smooth V groove
drive rolls and an inner wire guide.
KP1505-7/64C
Drive Roll Kits, Aluminum Wire
Includes: 4 polished U groove drive rolls, outer wire
guide and an inner wire guide.
KP1507-035A
KP1507-040A
KP1507-3/64A
KP1507-1/16A
KP1507-3/32A
INSTALLATION
.023-.030 (0.6-0.8mm)
.035 (0.9mm)
.045 (1.2mm)
.052 (1.4mm)
1/16 (1.6mm)
.030-.035" (0.8-0.9mm)
.040-.045" (1.0-1.2mm)
.052" (1.4mm)
1/16" (1.6mm)
.068-.072" (1.8mm)
5/64" (2.0mm)
3/32" (2.4mm)
7/64" (2.8mm)
.120" (3.2mm)
7/64" (2.8mm)
.035" (0.9 mm)
.040" (1.0mm)
3/64" (1.2mm)
1/16" (1.6mm)
3/32" (2.4mm)
POWER FEED 10M SINGLE/DUAL
CHANGING DRIVE ROLLS AND
GUIDES
FIGURE A.4
ITEM
1
2
3
To change drive rolls and wire guides:
1. Turn off power at the welding power source.
2. Open wire drive door.
3. Remove the outer wire guide. (Item #3)
4. Remove the 4 drive rolls (Item #2) by pulling them
straight off of the drive hub. Rock the upper drive
rolls back for ease of removal.
5. Remove the inner wire guide (Item #1).
6. Insert the new inner wire guide (Item #1) over the
locating pins of the feed plate.
7. Install each drive roll by pushing it onto the hub until
it fully seats.
8. Install the outer wire guide.
9. Swing the upper drive rolls down and close the wire
drive door.
A-7
WIRE
WIRE DRIVE DOOR
(OPEN)
DESCRIPTION
Inner Wire Guide
Drive Rolls
Outer Wire Guide