Technical Data - Black & Decker GLC1423L Original Instructions Manual

ENGLISH
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and
recycling of BLACK+DECKER products once they have
reached the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
address indicated in this manual. Alternatively, a list of
authorised BLACK+DECKER repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com
Batteries
Z
At the end of their useful life, discard batteries with
due care for our environment:
Run the battery down completely, then remove it from the
u
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Place the
u
battery(s) in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take them to any
authorised repair agent or a local recycling station.
Do not short-circuit the battery terminals.
u
u
in a risk of personal injury or an Explosion.
6 10 10
(Original instructions)

Technical data

GLC1423L
H 1
V 14.4
Input Voltage
AC
min
No-Load Speed 7100
-1
cm
Cutting width 23
kg
Weight 1.3
Hand/arm weighted vibration value according to EN 786:
= 8.03 m/s , uncertainty (K) = 1.5 m/s
2
L (sound preasure) 75 dB(A)
PA
uncertainty (K) = 4 dB(A)
GLC1825L GLC1823L
H 1
H 1
18 18
7400 7400
25 23
1.5 1.4
.
2