Table of Contents
Related Manuals for Black & Decker GLC2000
Summary of Contents for Black & Decker GLC2000
- Page 1 GLC2000...
- Page 2 Copyright Black & Decker...
- Page 4 16 18...
- Page 5 33 32 38 37...
- Page 6 20 °...
-
Page 8: Ec Declaration Of Conformity
CONGRATULATIONS! INTENDED USE You have chosen a Black & Decker tool. Our aim is Your Black & Decker strimmer GLC2000 has been to provide quality tools at an affordable price. designed for trimming and finishing lawn edges We hope that you will enjoy using this tool for and to cut grass in confined spaces. - Page 9 E N G L I S H General 10. Check for damaged parts Before use, carefully check the tool for 1. Consider work area environment damage. Check for misalignment and seizure Do not expose the tool to rain. Do not use the of moving parts, breakage of parts, damage to tool in damp or wet conditions.
- Page 10 E N G L I S H Do not store in locations where the The following symbol is found on the charger: temperature may exceed 40 °C. Charge only at ambient temperatures between 4 °C and 40 °C. Intended for indoor use only. Charge only in a dry, well ventilated area.
-
Page 11: Electrical Safety
E N G L I S H ELECTRICAL SAFETY Fitting the guard (fig. B) Your charger has been designed for a specific Remove the battery from the tool. mains voltage. Always check that the mains voltage Place the guard (9) onto the tool as shown, corresponds to the voltage on the rating plate. - Page 12 E N G L I S H Remove the battery from the tool. Keep the tabs (25) depressed and remove the spool cover (26) from the housing (27). Let the tool work at its own pace. Remove the empty spool (28) from the housing. Do not overload.
-
Page 13: Maintenance
E N G L I S H Adjusting the position of the secondary handle Switching on (fig. A & J) Push the lock-off button (2) forward using your The secondary handle can be adjusted to provide thumb and at the same time squeeze the optimum balance and comfort. -
Page 14: Troubleshooting
E N G L I S H Automatic line feed does not work Before performing any maintenance on Keep the tabs depressed and remove the the tool, remove the battery from the tool. spool cover from the spool. Unplug the charger before cleaning it. Lift the spool approx. -
Page 15: After Sales Service
These items disposed of properly. are regarded as replacement items which wear during normal usage. Failures as a result of sudden impact or obvious Technical data GLC2000 abuse. Voltage Failures due to usage not in accordance with No-load speed 6,800... - Page 16 E N G L I S H OTHER OUTDOOR TOOLS Black & Decker has a full range of outdoor power tools that make life in the garden easy. If you would like further information on the following products, please contact our Service and Information Centre (see the address page towards the end of this manual) or your local Black &...
- Page 18 Australia WALT Industrial Power Tool Company Tel. 03 9895 9200 7 Clarice Road Fax 03 9899 7465 Box Hill, Victoria 3128 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnson Drive Fax 09 579 8200 Penrose, Auckland, New Zealand South Africa Black &...
- Page 20 243266-01...