Replacing The Cooling Fan - Dell Latitude 120L Service Manual
Hide thumbs
Also See for Latitude 120L:
- Quick reference manual (96 pages) ,
- Specifications (2 pages) ,
- Quick reference manual (190 pages)
Table of Contents
Advertisement
1
fan assembly
2
metal plate
17. Remove the plate and lift the system board off the fan assembly.
Replacing the Cooling Fan
1. Position the system board over the fan assembly, aligning the screw holes in the system board with those in the fan assembly.
2. Place the metal plate over the holes in the system board and replace the four M2.5 x 5-mm screws.
3. Turn the system board over and connect the fan connector to the system board.
Back to Contents Page
3
M2.5 x 5-mm screws (4)
Advertisement
Table of Contents
