Replacing The Processor Thermal-Cooling Assembly - Dell Latitude 120L Service Manual
Hide thumbs
Also See for Latitude 120L:
- Quick reference manual (96 pages) ,
- Specifications (2 pages) ,
- Quick reference manual (190 pages)
Table of Contents
Advertisement
Replacing the Processor Thermal-Cooling Assembly
NOTICE:
Before you install the replacement processor thermal-cooling assembly, remove the mylar that covers the thermal grease on the assembly.
1. Lower the processor thermal-cooling assembly into place on top of the processor, aligning the numbered screws, labeled "1" through "4," with the
numbers on the fan assembly, and the arrow on the pull-strap pointing toward the outside edge of the system board.
2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
3. Replace the thermal-cooling/processor cover and tighten the screw.
Back to Contents Page
Advertisement
Table of Contents
