Removing A Memory Module - Dell Latitude 120L Service Manual

Back to Contents Page
Memory, Optical Drive, and Mini PCI Card
Dell™ Latitude™ 120L Service Manual
Memory
Optical Drive
Mini PCI Card
Memory

Removing a Memory Module

CAUTION: Before working inside your Dell™ computer, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTE: Memory modules purchased from Dell are covered under your computer warranty.
1. Follow the instructions in Before Working Inside Your
2. Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE: If you leave the area, ground yourself again when you return to the computer.
3. Turn the computer upside-down, loosen the captive screws on the memory module/Mini PCI cover, and then remove the cover.
1 captive screws (3)
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.
4. If you are replacing a memory module, remove the existing module:
a. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
b. Remove the module from the connector.
Computer.