CASTILE INSERT
I. Optional Log Set Placement Instructions
Two Piece Log Set Installation
1.
Open door to expose the fi rebox.
2.
Install the left log fi rst and then the right log. Figure 24.1
3. Lean the logs against the cast iron brick in the back of
the fi rebox.
4. Push the logs to the far left and far right against the
sides of the fi rebox. Figure 24.2
5. To clean the logs, use a vacuum cleaner and a soft
brush attachment or a paint brush.
CAUTION
Logs are FRAGILE. Use extreme care when handling or
cleaning logs.
Figure 24.1
Figure 24.2
NOTE:
Due to the abrasive nature of a pellet appliance fi re, the
logs are not covered under warranty. Any placement vari-
ation other than shown here can cause excessive heat and
shall void the appliance warranty.
Firepot Cleaning Rod
Figure 24.3
24
Red Call
Light
Fuse
Heat Output
Switch
Reset Button
Junction Box
7022-514C
Control Box
Power Cord
Outlet
Thermostat
Block
July 7, 2015