Lincoln Electric COMMANDER SVM153-A Service Manual page 88

F-35
SCREWS
FRONT
CONTROL
PANEL
TEST PROCEDURE
1. Turn the engine off.
2. Using the 3/8" wrench, remove the four
screws holding the front control panel to the
case top and sides.
(There are two screws on the top and one
screw on each side.)
3. Carefully lower the front control panel.
TROUBLESHOOTING & REPAIR
STATOR VOLTAGE TEST (CONTINUED)
FIGURE F.13 – FRONT CONTROL PANEL REMOVAL
See Figure F.13.
COMMANDER 500
SCREW
4. Using the 3/8" wrench, remove the front left
and right side panels.
5. Using the 3/4" wrench, remove the internal
leads from the output terminals. Insulate the
leads.
F-35