System Management; Etting System Time; Notification Configuration - Thecus N8800 IP User Manual

System Management

The System Management menu gives you a wealth of settings that you can use to
configure your N8800's system administration functions. You can set up system
time, system notifications, and even upgrade firmware from this menu.
Time: Setting system time
From the time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on the N8800 with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Date
Time
Time Zone
Act as NTP Server
Sync with external NTP
Server
WARNING

Notification configuration

From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have the N8800 notify you in
case of any system malfunction. Press Apply to confirm all settings. See following
table for a detailed description of each item.
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Select YES to allow the N8800 to synchronize with an NTP server
of your choice. Press Apply to change.
If an NTP server is selected, please make sure your N8800's network has been
setup to access the NTP server.
28