System Management; System Notifications; System Logs - Thecus N299 User Manual

System Management

The System menu gives you a wealth of settings that you can use to configure
your N299's system administration functions. You can set up system notifications,
view system logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the
Notification item, and the
Notification Configuration screen
appears. This screen lets you have
the N299 notify you in case of any
system malfunction. Press Apply to
confirm all settings. See following
table for a detailed description of
each item.
Notification Configuration
Item
Beep Notification
Email Notification
SMTP Server
Port
Auth Type
Sender Address
Sender Password
Confirm Password
Receivers' E-mail
Address
Send Test Mail
NOTE

System Logs

From the System menu, choose the
Logs item and the System Logs
screen appears. This screen shows a
history of system usage and
important events such as disk status,
network information, and system
booting. See the following table for a
detailed description of each item:
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Select the SMTP Server account authentication type.
Set the sender mail address.
Enter the password for the sender's mail account.
Confirm a new password.
Add one or more recipient's email addresses to receive email
notifications.
Click to send out a test e-mail to make sure the settings are
correct.
Consult with your mail server administrator for email server information.
37