System Management; Time: Setting System Time; Notification Configuration - Thecus 8900 series User Manual

System Management

The System Management menu gives you a wealth of settings that you can use
to configure your Thecus IP storage system administration and functions. You can
set up system time, system notifications, and even upgrade firmware from this
menu.

Time: Setting system time

From the time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on Thecus IP storage with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Date
Time
Time Zone
NTP Service
Sync with external NTP
Server
WARNING

Notification configuration

From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have Thecus IP storage notify
you in case of any system malfunction. Press Apply to confirm all settings. See
following table for a detailed description of each item.
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Select YES to allow Thecus IP storage to synchronize with an NTP
server of your choice. Press Apply to change.
If an NTP server is selected, please make sure your Thecus IP storage has been
setup to access the NTP server.
59