Additional printer setup
Use the
1
USB wireless port
2
Security lock port
3
Printer power cord
socket
4
LINE port
5
EXT port
6
Rear USB port
7
USB printer port
8
Ethernet port
Setting up the printer software
Installing the printer
1
Obtain a copy of the software installer package.
2
Run the installer, and then follow the instructions on the computer screen.
8
7
6
To
Attach an optional wireless network adapter.
Lock the controller board.
Connect the printer to a properly grounded electrical outlet.
Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if
this connection method is supported in your country or region.
Note: Remove the adapter plug to access the port.
Attach a keyboard.
Connect the printer to a computer using a USB cable.
Connect the printer to an Ethernet network.
4
5
1
2
3
36