Solving Printer Problems; Printer Display Is Blank - Lexmark CX510 Series User Manual

Troubleshooting
Weblink server not set up. Contact system administrator.
An error occurred on the Weblink server, or the server is not configured properly. Touch Continue to clear the message.
If the message appears again, contact your system support person.

Solving printer problems

Basic printer problems

Printer display is blank

Action
Step 1
Press the Sleep button on the printer control panel.
Does Ready appear on the printer display?
Step 2
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Do Please wait and Ready appear on the printer display?
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
Step 3
Check if one end of the power cord is plugged into the printer and the
other to a properly grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
Yes No
The problem is solved. Go to step 2.
The problem is solved. Turn off the printer,
and then contact
customer
Yes No
Go to step 2. Turn on the printer.
Press the Sleep button Go to step 3.
to wake the printer
from Sleep mode or
Hibernate mode.
Go to step 4. Plug one end of the
power cord into the
printer and the other to
a properly grounded
electrical outlet.
264
support.