Skoda Octavia Operating Instructions Manual page 153

Automatic stop-start

Read and observe on page 148 first.
Vehicles with an automatic transmission can decelerate to a standstill and
start moving again using the ACC.
Decelerate to a standstill
If a vehicle ahead decelerates to a standstill, the ACC will also decelerate your
vehicle to a standstill.
Starting to drive again after a holding period
As soon as the vehicle ahead starts moving again after a holding period, your
vehicle will also move and the speed will continue to be regulated. Control is
automatically disconnected in case of longer holding periods.
Depress the brake pedal.
Operation Overview
Fig. 163 Operating lever

Read and observe on page 148 first.
Overview of ACC functions operated with the lever
   Set proximity level
A
Start control (adopt current speed) / Reduce speed by 1 km/h at
B

a time
Activate ACC (control deactivated)
1

Start control (resume) / increase speed by 1 km/h at a time
2

(sprung position)
Interrupt control (sprung position)
3

150
Driving
4
5
6
If the lever is set
tion,  the current speed is stored and the control process is started.
Start control

Basic requirements for start of control






The control be started with the key  or by adjusting the lever 
on page 150 into the sprung position.
Button 
›
Press  .
The ACC will adopt the current speed and execute control.
Lever position 
›
Set the lever into the sprung position  set.
» Fig. 163
The ACC will adopt the current speed and execute control. Should the speed
be stored already, the ACC adopts this speed and executes control.
The warning light
is switched on.
Deactivate ACC

Increase speed by 10 km/h at a time
 
Decrease speed by 10 km/h at a time
 
Note
» Fig. 163 from the position  directly into the sprung posi-
Read and observe on page 148 first.
ACC is enabled.
TCS is enabled » page 133, Braking and stabilisation systems.
On vehicles with a manual transmission, the second gear or higher must
be engaged.
On vehicles with an automatic transmission, the selector lever must be in
the D/S position or in the Tiptronic position.
On vehicles with a manual transmission, the current speed must be higher
than approx. 25 km/h.
On vehicles with a automatic transmission, the current speed must be
higher than approx. 2 km/h.
illuminates in the instrument cluster when the regulation

» Fig. 163
