Roof Rack - Skoda Octavia Operating Instructions Manual

Hide thumbs Also See for Octavia:
Table of Contents

Advertisement

Fitting
Insert the recesses on the net partition housing into the mounts on the rear
seat backrests.
Push the net partition housing in the opposite direction of the arrow
» Fig. 124
as far as the stop.
Fold the rear seats back into their original positions

Roof rack

Introduction
This chapter contains information on the following subjects:
fixing points for base support
Stowing the roof rack
Roof load
WARNING
When transporting cargo the following the instructions must be adhered
to.
The transported items on the roof rack must always be securely attached
– risk of accident!
Always secure the load with appropriate and undamaged lashing straps
or tensioning straps.
Distribute the load evenly over the roof rack system.
When transporting heavy objects or objects which take up a large area on
the roof rack system, the handling of the car may change as a result of the
displacement of the centre of gravity. The style of driving and speed must
therefore be adapted to the current circumstances.
Avoid abrupt and sudden driving/braking manoeuvres.
The permissible roof load, permissible axle loads and gross permissible
weight of the vehicle must not be exceeded under any circumstances – risk
of accident!
CAUTION
On models fitted with a sliding/tilting roof, ensure that the sliding/tilting roof
does not strike any items of luggage transported on the roof when tilting.
Ensure that the luggage compartment lid does not hit the roof load when
opened.
The height of the vehicle changes after mounting a roof luggage rack system
including the load that is being transported. Compare the vehicle height with
available clearances, such as underpasses and garage doors.
Ensure the roof aerial is not impaired by the load being transported.
1
» page
87.
We recommend that you use a roof rack from ŠKODA Original Accessories.
fixing points for base support
109
110
110
Fig. 125 Attachment points
The mounting points are located on both sides of the vehicle.
Arrangement of the mounting points
A
B
The mounting and dismounting of the basic carrier is carried out according to
the instructions provided.
Note
Read and observe
and
on page 109 first.
Front attachment points
Rear attachment points
Transporting and practical equipment
» Fig. 125
109

Advertisement

Table of Contents
loading

Table of Contents