Panasonic SC-HT930 Operating Instructions Manual page 8

5
STEP
System cable
≥Connect the AC mains lead after all other connections are complete.
≥Optional antenna connections (➜ page 25).
FM indoor antenna
Affix this end of the antenna
where reception is best.
Adhesive tape
Main unit
A
System cable
Conserving power
The main unit consumes a small amount of power, even when it is
turned off (approx. 0.9 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the
unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
RQT7985
8
Radio and system connections
AM loop antenna
Click!
FM ANT FM ANT
VCR TV
(7 (75≠ )
AUDIO AUDIO
AUX
IN IN
L
AM ANT AM ANT
LOOP LOOP
R
EXT EXT
Catch up
To disconnect
Press the catch
and pull out.
Active subwoofer
FM indoor antenna AC mains lead
[Southeast]Asia,[Thailand,]
[the[Middle[East,[South[Africa,[
[Saudi[Arabia[and[Kuwait]
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other
wires and cables.
REC
OUT
P
1
P
2
Catch up
To disconnect
Press the catch
and pull out.
[Saudi[Arabia]and[Kuwait]
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
[Saudi[Arabia]and[Kuwait]
Before connecting the AC
mains lead
Set the voltage.
127 V 110 V 220 V-230 V
VOLT ADJ
Use a flat-head screwdriver to turn the
voltage selector on the back of the
subwoofer to the appropriate position for
the area in which this system is used.
If the power supply in your area is 115 V or
120 V, please set the voltage selector as
follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC mains lead
To household mains socket
240 V