Optional Antenna Connections - Panasonic SC-HT930 Operating Instructions Manual

∫ AM frequency step
M
ain unit only
The step is factory-set to 9 kHz, but you can change it to receive
broadcasts allocated in 10-kHz steps.
1 Press [INPUT SELECTOR] to select "FM".
2 Press and hold [INPUT SELECTOR].
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
After changing the setting, previously preset frequency will be
cleared. Preset it again.

Optional antenna connections

Use outdoor antennas if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
FM outdoor antenna (Using a television antenna)
≥Disconnect the FM indoor antenna.
≥The antenna should be installed by a competent technician.
75 ≠ coaxial cable
(not included)
Leave the AM loop antenna connected.
AM outdoor antenna (Using a vinyl wire)
Run a piece of vinyl wire horizontally across a window or
other convenient location.
FM ANT FM ANT
(7 (75≠ )
AU
L
AM ANT AM ANT
A
LOOP LOOP
R
EXT EXT
5–12 m
RQT7985
25