Planar EP-Series User Manual page 52

Communication Menu
Signal Lost Alert
Load Default
Device MAC
Assigning an IP Address to the Display
To assign an IP address to your display, access the IP Address Settings Menu in the
Communication menu. Consult your system administrator if you do not know how
to configure the parameters shown in the menu.
The default settings are shown below.
46
Enable an automatic alert when the video signal is lost
Options: No, Yes
Default: No
Load default communication settings
Options: No, Yes
Default: No
Shows the MAC address of the display
Item
Dynamic IP
Static IP Address
Subnet Mask
Gateway
DNS Addr.
EP-Series Ultra HD LCD Displays User Guide
Setting
Disable
192.168.2.1
255.155.155.0
192.168.2.1
192.168.2.1