Starting / Stopping The Engine - Stihl SR 340 Instruction Manual

Starting / Stopping
the Engine
1
2
: Observe safety precautions – see
chapter on "Safety Precautions and
Working Techniques".
: Slide the stop switch (1) to #
: Move the setting lever (2) to the
center position – this is the
starting throttle position
The setting lever can be used to select
any throttle opening between idle speed
(lower stop) and full throttle (upper stop).
Set the lever to the idle position before
switching off the engine.
SR 340, SR 420
Before starting
: Move stop cock lever (3) to upright
position.
English / USA
: If the engine is cold, turn the choke
knob to g
: If the engine is warm, turn the
choke lever to e
Also use this position if the engine
has been running but is still cold.
19