(2) Click one of IP Cameras listed on the left side of IP Installer, then the network configuration
of
that IP Camera will be listed on the right side. If parameters changed, click on "Submit". Then
the
network configuration will be changed. Just click "OK" to reboot
(3) Please make sure the subnet of PC IP address and IP CAM IP address are the same.
IP
CAM IP address: 192.168.0.20
PC
IP address: 192.168.0.100
(4) Different Subnets:
IP
CAM IP address: 192.168.0.20
PC
IP address: 192.168.1.100
(5) To Change PC IP addresses:
Control Panel Network Connections Local Area Connection Properties Internet Protocol
(TCP/IP)
Properties
Please make sure your IP Camera and PC have the same Subnet. If not, please change IP
Camera IP subnet or PC IP subnet accordingly.
2 Mega‐Pixel Outdoor IR IP Camera
ICA‐HM316 / ICA‐HM316W
17
,