Pppoe; Ddns - Planet ICA-HM316 User Manual

UPnP
ONVIF
Please follow the procedure to activate UPnP

6.2.2 PPPoE

PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet camera
connects to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP
address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL, however, it should be setup on a LAN environment to program
the PPPoE information first, and then connect to the xDSL modem. Power on again, then the
device will dial on to the ISP connect to the WAN through the xDSL modem.
The procedures are:
(1) Select "Enabled" to use PPPoE.
(2) Key-in Username and password for the ADSL connection.
(3) Send mail after dialed：When connect to the Internet, it will send a mail to a specific mail
.account. For the mail setting, please refer to "Mail and FTP" settings.

6.2.3 DDNS

DDNS: Stands for Dynamic Domain Name Server
The device supports DDNS If your device is connected to xDSL directly, you might need this
feature. However, if your device is behind a NAT router, you will not need to enable this feature.
This IP camera supports UPnP, If this service is enabled on your
computer, the camera will automatically be detected and a new
icon will be added to "My Network Places."
Note: UPnP must be enabled on your computer.
The IP camera supports ONVIF v1.01 / v1.02 standard for to
integration.
43
2 Mega‐Pixel Outdoor IR IP Camera
ICA‐HM316 / ICA‐HM316W