Programmguide; Channel Search; Auto Scan; Manual Scan - Megasat SAT>IP Receiver User Manual

Hide thumbs Also See for SAT>IP Receiver:

Table of Contents

Available languages

Programguide

Watch the Electronic Program Guide

(EPG). The schedule recording can be

set on the EPG list.

Return: press "Return" to exit this page.

Red key: open the channel list to

select another channel.

Up/Down key: press up/down key to

change the event for a single day

Left/Right key: press left/right key to

change to another week day

Select "Auto Scan" or "Manual Scan" to begin the channel search. Before channel search,

make sure the device is in the same network domain as the SAT>IP server, and SAT>IP

server is turned on.

ENGLISH

Select "Start Scan" to scan the DTV channel. Wait for the scanning complete. If you want

to change a different region, select "Change Region" to select it on the list.

Select "Manual Scan", and setup the parameters to scan. Select "Start Scan" to scan the

channel. You may need to contact the operator for the parameters.

ENGLISH

Table of Contents

Chapters

Table of Contents

Do you have a question about the SAT>IP Receiver and is the answer not in the manual?