Watch Tv Programm; Home Menu - Megasat SAT>IP Receiver User Manual

Watch TV program
When the Channel-scan is completed, the device will go to TV program. After that, the
device will go to TV program when it's power on, or you pressing "TV" key on the remote
control.
When you watching TV program, press the keys on the remote control:
OK key: pop up the program list, use Up/down key to select a program, and press OK.
Red key/Audio key: pop up the audio list to select an available audio in the program.
Blue key/Subtitle key: pop up the audio list to select an available subtitle in the pro-
gram.
REC key: press it to start recording current program. Press "Stop" key to stop the recor-
ding. In the recording, the TV program can't be changed.
INFO: pop up the program information, press twice to show the current program guide.
EPG: go to "Program Guide" page.
TTX: open the Teletext in the current program, use direction keys to navigate, "RETURN"
key to exit.
CH </> : change the TV program.
VOL +/- : adjust the volume.
ENGLISH
08

Home menu

When the device is booted up, the home menu will be displayed. Select the item to
enter:
SAT>IP TV: watch the TV streams from SAT>IP TV server.
Multimedia: play video/music/movie on the plugged SD card or USB Flash disk.
Applications: open the applications and upgrade firmware.
Settings: setup the detail settings for the device.
ENGLISH
09