Operation (Cutting Straight Edges, Diagonal Cutting, 45° Miter Cutting, Off-Angle Cutting) - MK Diamond Products MK-660 Owner's Manual & Operating Instructions

MK-660 tile saw
CUttiNG stRaiGHt eDGes
DO NOt FORCe tHe tOOl. It will do the job better and safer at the rate for
CaUtiON
which it was designed.
(A)
Loosen the adjustable Cutting
Guide retaining thumbscrew
(D)
Place the tile against the
Ruler/Stop and Cutting Guide
(G)
Perform the cut
(B)
Position the adjustable Cutting
Guide to desired cut length
indicated inside the diamond
(E)
Turn the motor ON
(H)
Turn the motor OFF when
work is complete
23
OPeRatiON
(C)
Tighten the retaining thumbscrew
(F)
Verify flow on both sides of the
blade (See Maintenance Section
to adjust flow)