MK Diamond Products MK-660 Owner's Manual & Operating Instructions page 6

MK-660 tile saw
ON
Use PROPeR aPPaRel
DO NOt wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may
be caught in moving parts. Non-slip footwear is recommended. Wear protective hair cover-
ON
ing to contain long hair.
seCURe wORK
Clamps or a vise should be used to hold work whenever practical. Keeping your hands free
ON
to operate a power tool is safer.
DO NOt OVeRReaCH
ON
Keep proper footing and balance at all times by not overreaching.
DisCONNeCt tOOls
Power tools should always be disconnected before servicing, adjusting or when changing
ON
accessories, such as blades, bits, cutters, and the like.
MaiNtaiN tOOls witH CaRe
Keep tools clean and maintained for the best and safest performance. Always follow
maintenance instructions and examine the machine before use. If any abnormal vibrations
or noises occurs, turn off machine immediately and have the problem corrected before
further use.
ReMOVe aDJUstiNG KeYs aND wReNCHes
Form a habit of checking to see that keys and adjusting wrenches are removed from
ON
the power tool before it is turned on.
KeeP wORK aRea CleaN
Cluttered work areas and benches invite accidents. Keep area around machine clear of
ON
obstructions which could cause persons to fall.
DO NOt Use iN DaNGeROUs PlaCes
DO NOT operate equipment in dangerous or hazardous environments. DO NOT use power
tools in damp or wet locations nor expose them to rain. Always keep the work area well
ON
lighted.
Use ReCOMMeNDeD aCCessORies
Consult the owner's manual for recommended accessories. Using improper accessories
may increase the risk of personal or by-stander injury. Unauthorized equipment
ON
modifications will void all warranties. Manufacturer does not assume responsibility for any
accident due to equipment modifications.
ON
ALWAYS ensure that the machine is on level ground before using.
NeVeR staND ON tHe tOOl
Serious injury could occur if a power tool is tipped, or if a cutting tool is unintentionally
ON
contacted.
tRaNsPORt
When loading or unloading the machine, use caution. Remove the blade prior to hoisting,
loading and transporting the machine.
6
saFetY