Table of Contents
Advertisement
I.
DWL-2100AP
DWL-2100AP includes all standards 802.11b/g only. The connection could be select to enable 802.11b/g or
disable. The DWL-2100AP is fully compatible with the IEEE 802.11b and 802.11g standards.
Subnet Mask: The default is 255.255.255.0. All devices in the network must share the same subnet mask.
Default Gateway: The default is 192.168.1.1. Enter the gateway IP address for the network, typically a
router.
SNMP
Public Community: When SNMP is enabled, modify the public community string.
Private Community: When SNMP is enabled, modify the private community string.
User Status Notification: Select Enable or Disable the notification.
SYSLOG
System Activity: Select "Enable" to allow the logging of system actions, such as logging a firmware
upgrade.
Wireless Activity: Select "Enable" to allow the logging of any wireless clients that connect to the AP.
Notice: Select "Enable" to allow all other information to be logged.
Remote SYSLOG Server: If you require more space to hold your logs, please provide the IP address of
Chapter 4.3 Access Points
87
Advertisement
Table of Contents
